One-Stop Solution Expert In Gabion Machine

Home / All / Gabion Machine /

Wire Mesh Feeding Machine for Gabion Machine/Gabion Mesh Machine

Wire Mesh Feeding Machine for Gabion Machine/Gabion Mesh Machine

Wire Mesh Feeding Machine for Gabion Machine/Gabion Mesh Machine
CategoriesGabion Machine
BrandCANDID
ModelNFM-4000
Max. working width5000mm
Wire diameter≤5mm
Upper roll sizeΦ133mm * 3pcs
Down roll sizeΦ133mm * 4pcs
Straightening thickness≤2.8mm
Output8.5m/minute
Power5.5KW
Roller Speed20turn/minute
Weight2.5T
Size(LXWXH)5550X1450X1400(mm)
FOB portShanghai Tianjin Ningbo
Terms of PaymentL/C, D/A, D/P, Western Union, T/T
Update TimeMay 30,2024
Detail Information
Wire Mesh Feeding Machine Specifications
1 Max. working width 5000mm
2 Wire diameter ≤5mm
3 Upper roll size Φ133mm  * 3pcs
4 Down roll size Φ133mm  * 4pcs
5 Straightening thickness ≤2.8mm
6 Output 8.5m/minute
7 Power 5.5KW
8 Roller Speed 20turn/minute
9 Weight 2.5T
10 Size(LXWXH) 5550X1450X1400(mm)
11 Infrared ray meter counter
12 Wire stop device when the cutting machine cut the net
13 Frequency motor
Advantages of Wire Mesh Feeding Machine

The Wire Mesh Feeding Machine is one of significant auxiliary machines for the gabion production line.  It straightens and feeds the wire mesh to the cutting machine, during this process, the machine ensure the evenness so that the gabion box could stay for a long time as possible.
The Wire Mesh Feeding Machine is pretty easy to operate and barely requires to maintenance. It is equipped with PLC and only needs to set several parameter, such as number of wire mesh or reduction ratio then it’d work automatically.
The Wire Mesh Feeding Machine  is also equipped with wire stop device, it will not keep feeding until the cutting machine finished the cutting move.
Wire Mesh Feeding Machine Application Site

Wire Mesh Feeding Machine Products


Wire Mesh Feeding Machine FAQs


Q: What’s the distance between Wire Mesh Feeding Machine and wire mesh cutting machine?
A: Measure 2.5m at the front of the net winding machine where to put the net straightening machine. Pls make sure that it is parallel with net winding machine.
Q: What should be preparing for running this machine?
A:  Feeding lubricating oil before starting machine. Then starting test running the machine around 10 mins without feeding net till it runs smooth.

Review
  • Loading...
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Follow us
subscription